Roofing Wall Cladding
The exterior wall skin consisting of panels or sheets and their attachments, trim and weather sealents. Wall cladding shall conform to the strength of 550 Mpa. Steel (PPGL) panels shall sheeting for roofing and wall cladding application with thickness of 0.50 mm TCT. The profile is having 30 mm depth, 200 mm pitch with two stiffening ribs & anti capillary flute. The sheet width is 1075 mm & Covered width of 1010 MM. The basic material is High tensile 550 MPa steel with hot dip coating of 55% Al +45% Zn alloy mass coating as per ASTM A 792, with 20 u DFT RMP (Regular Modified Polyester) Finish coat (26gauge) over 5 u DFT primer, and unexposed surface with 5- 7u primer paint. Each panel can be shipped in any length up to 12m.
GIRTS for Roofing and Wall Caldding
Secondary horizontal member attached to the main frame columns are girts. Wall girts are cold formed Z shape members, which are of various thickness and variable depth depend upon the design. The wall girts are connected to the external extension of the columns along the walls. Clips already made along the columns join the wall girts to the outer projection of the side wall lines, the network of wall girts being joined to the cleats. The wall girts are vital to the secondary framing systems, which along with the primary framing systems and the connectible sheeting form the pre-engineered structure.
Brace rod are placed diagonally in the roofs and walls for the purpose of transferring wind loads to the foundations and longitudinally stabilizing the building
Roof and Wall Day Light Panel
Roof and wall Light panels used to transmit natural light inside the building to reduce the power consumption in daytime. Day Light panels are made of transparent Fiber reinforcement plastic or polycarbonate material.
Cold-formed sheet metal section used to carry water from gutter. Downspouts shall be rectangular shaped, colour 0.5mm nominal thickness (26gauge) steel.
Gutter at the eave of a building are Eave gutters shall be colour 0.5MM nominal thickness (26gauge) sheet.
Raised gable, or portion of the main building, located at the ridge, to allow lighting and ventilation. The size of the monitor can be adjusted to suit exact ventilation and lighting requirements.
A flashing designed to close the opening between roof panels and endwall panels.
Electric Overhead Travelling Crane is one of the most common types of overhead crane, which consist of parallel runways with a travelling bridge snapping the gap.
Turbo ventilators are the wind to create effective ventilation for different industries. Turbo ventilators are round metal vents with fins in them.